User Calibration; User Calibration Screens - Raymarine autopilot Owner's Handbook Manual

Chapter 7: Adjusting Autopilot Settings

7.3 User Calibration

Note: If you are connecting the ST6001+ to a non-150/400 autopilot
system, the User Calibration group is not available. Refer to the
Appendix for full details.
The User Calibration group includes settings that you may need to
adjust on a regular basis due to changing conditions.

User Calibration screens

AutoTack angle
Note: Only available if vessel type = SAIL BOAT .
The AutoTack angle is the angle through which the boat will turn
when you select an automatic tack (see page 12).
Screen text
AUTO TACK
Gybe inhibit
Note: Only available if vessel type = SAIL BOAT .
With gybe inhibit on:
•
•
With gybe inhibit off, you can perform an AutoTack into or away
from the wind.
Screen text
GYBE STOP
Options
40° to 125° in 1° steps
you will be able to perform an AutoTack into the wind
to prevent accidental gybes, the autopilot will prevent the boat
from performing an AutoTack away from the wind
Options
On = Gybe inhibit on (gybes prevented)
OFF = Gybe inhibit off (gybes permitted)
Default = On
83