Pioneer AVH-P5900DVD/XN/UC Service Manual page 96

1
3. TP coordinates test
[Outline]
A
Coordinate before and after the correction when the touch panel is touched is displayed, and the operation is verified.
Furthermore, the cursor can be moved by using the up/down/left/right keys, and the coordinate of the cursor center
is displayed.
The cursor is displayed in red at the positions where the cursor was displayed during 16 points adjustment.
[Display specifications]
B
[ A . M E N U
C
AD : AD data value (X direction, Y direction), representing the coordinate of the point pressed, is displayed.
VD E2P : VD value (the value registered at the time of circumference setting) preset in the EEPROM.
VD : VD value currently being pressed.
NORMAL : The coordinate (X direction, Y direction), which is the result of normalizing the AD data value currently
being pressed within the effective range, is displayed.
D
CALIBRATION : The coordinate (X direction, Y direction), which is the result of applying the correction by calibration
to the normalized coordinate, is displayed.
[Key operation specifications]
Operational
description
To TOP menu
Cursor upward
E
movement
Cursor downward
movement
Cursor leftward
movement
Cursor rightward
movement
F
96
1
2
]
Remote controller
key
MENU_ENTER
AVH-P5900DVD/XN/UC
2
3
3
4
Display is
made in HEX.
4