Thread Tensioner - Brother Dream Quilter 15 Service Manual

Thread Tensioner

Tools Needed:
• 2.5mm Allen Wrench
Removal Steps
1. Loosen 1 M5 X 8mm Set Screw in
sewing machine.
2. Remove old Thread Tension
Assembly.
Assembly Steps
3. Press Thread Tension Assembly
into sewing machine body until it
bottoms out.
4. Orient Thread Tension Assembly
so that the spring is pointing
in roughly 90 degrees above
horizontal as shown in Figure 2.
5. Tighten 1 M5X8mm Set Screw
into sewing machine body and
tighten the Thread Tension
Assembly into place.
90 Degree Angle
Figure 1
Thread Tension
Assembly
M5 X 8mm Set Screw
10
Assembly
Figure 2