Cellular Approvals And Labeling Requirements; Modem Label Example - Multitech MT100UCC-EV3 Developer's Manual

For EV-DO, the modem's MEID is printed in hexadecimal format on the label.
Refer to the device labels for the location of the device identification.
IMPORTANT: When the cellular carrier asks you to provide the modem's model identification, give them the Multi-
Tech model identification, not the host device model number. The Multi-Tech model identification allows the
carrier to verify the modem as one of its approved models. This information is located on the modem's label.

Cellular Approvals and Labeling Requirements

Approvals and Certification
The Multi-Tech SocketModem used in the product is an industry or Carrier Approved modem. In most cases, when
integrated and used with an antenna system that was part of the Multi-Tech modem certification, no additional
approvals or certifications are required (however, EV-DO has a few exceptions) for the device you develop as long
as the following are met:
The antenna system cannot be altered.
Model Identification The Multi-Tech model identification allows the carrier to verify the modem as one of its
approved models. This information is located on the modem's label.

Modem Label Example

Note: The label is shown larger than actual size.
1 Multi-Tech model information
2 MEID for the attached modem
QuickCarrier™ USB-E MT100UCC-EV3 Developer Guide
CELLULAR INFORMATION
9