Table of Contents
Advertisement
Chapter 1 – Product Overview
About the QuickCarrier USB-E MT100UCC-EV3
This guide describes how to use the QuickCarrier USB-E to embed M2M connectivity into your Windows or Linux
device. The embedded cellular modem is a complete, ready-to-integrate communications device that offers 3G
cellular connectivity options. The quick-to-market product combines a network approved cellular SocketModem®
and a USB carrier card in one compact design. With its 4-pin USB interface the embedded cellular modem cables to
an existing device's internal USB port and can be secured using the four mounting holes located at the corners of
the printed circuit board.
Documentation
The following table describes additional documentation for your device.
The guides are available on the Multi-Tech support web site at www.multitech.com/man.go.
Guide Description
MT100UCC-EV3 Developer Guide
AT Commands Reference Guide
USB Driver Installation
Selecting the Correct Model and Accessories
The following table describes which model and accessory kit to select for your needs.
Model
MT100UCC-EV3-N2
MT100UCC-EV3-N3
MT100UCC-EV3-N16
MT100UCC-AK
QuickCarrier™ USB-E MT100UCC-EV3 Developer Guide
Part Number
This guide (S000580)
EV-DO EV3 AT Commands Reference Guide (S000546)
USB Driver Installation Guide for EV-3 (S000569)
Description
EV-DO Rev A Embedded USB Modem (Sprint)
EV-DO Rev A Embedded USB Modem (Verizon)
EV-DO Rev A Embedded USB Modem (Aeris)
Accessory kit, includes USB cables, antenna cable and
antenna
PRODUCT OVERVIEW
5
Advertisement
Table of Contents
