Oma-Dm Commands - Multitech MT100UCC-EV3 Developer's Manual

OMA-DM Commands

These commands are available after the unsolicited indication #900 appears, which means DM client is ready.
AT#OMADMSVADDR=<URL>
AT#OMADMSVADDR?
AT#OMADMSVPORT=<port#>
AT#OMADMSVPORT?
AT#OMADMPROXY=<port#>,<URL>
AT#OMADLPROXY=<port#>,<URL>
AT#OMADMCEN=<onoff>
AT#OMADMCEN?
AT#OMADMCEN=?
AT+OMADM=(onoff)
AT+OMADM=?
AT+PRL=<onoff>
AT+PRL=?
AT+FUMO=
AT+FUMO=?
AT#HFA
AT#HFACANCEL
AT$RTN=xxxxxx
AT#SPRTN=xxxxxx
AT#DCCANCEL
AT#PRLCANCEL
AT$PRL?
AT#FUMOCANCEL
Sprint Successful Indications
Typical Successful HFA Session
Indications
#900
QuickCarrier™ USB-E MT100UCC-EV3 Developer Guide
Set OMA-DM server address (default
https://oma.ssprov.sprint.com/oma)
Read OMA-DM server address
Set OMA-DM server (default 443)
Read OMA-DM server
Set OMA-DM proxy server port/URL (default
http://oma.ssprov.sprint.com:80)
Set OMA-DL Proxy DL Server Port URL (default
http://oma.ssprov.sprint.com:80)
Set OMA-DM Client feature; Disable=0, Enable=1
Important:
OMA commands result in error if OMADMCEN is set to 0.
Query the current OMA-DM client status
Query OMA-DM available values
Set OMA-DM Client Initiated Device Configuration; Disable=0, Enable=1,
Initiate=2
Query OMA-DM Client Initiated Device setting
Set OMA-DM CIPRL Session; Disable=0, Enable=1, Initiate=2
Query OMA-DM CIPRL Session setting
Set OMA-DM FUMO enable parameter; Disable=0, Enable=1, Initiate=2
Query OMA-DM FUMO parameter
Initiate Sprint Hands Free Activation (HFA)
Cancel Sprint Hands Free Activation (HFA) DM Session
HFA reset (after device reboot HFA will occur) xxxxxx= SPC or MSL.
Note: May not work with all firmware versions.
After device reboot HFA will occur xxxxxx= SPC or MSL
Cancel Device Configuration (DC) Session
Cancel Preferred Roaming List (PRL) Session
Query Preferred Roaming List (PRL) ID #
Cancel Firmware Update Management Object (FUMO) session.
Alternate Successful HFA Session
Indications
#900
Never deploy devices with AT#OMADMCEN=0. Many
Typical Successful FUMO Session
Indications With firmware update
#907
OEM INTEGRATION
15