Table of Contents
Advertisement
Chapter 8 – Application Notes
MT100UCC-EV3 Application Notes
LED Interface
The LED signal indicates the working status of the QuickCarrier.
Power LED
Signal
OFF
ON
Link Status LED
Signal
OFF
ON
RF Interfaces
Radio Characteristics
Frequency RX
Frequency TX
Impedance
VSWR
Typical Radiated Gain
Output Power
RF Performances
All values indicated are conducted.
Receiver Features
QuickCarrier™ USB-E MT100UCC-EV3 Developer Guide
Description
No power to the unit.
The unit is functioning.
Description
No power to the unit.
Continuously lit: During initial connection to tower or when
connected and passing data.
Slow blink (-0.2Hz): Registered to tower and idle.
Faster blink (-3Hz): Powered not registered/Searching for
registration.
CDMA/EV-DO 800
869 to 894 MHz
824 to 849 MHz
50 ohms
<2
0 dBi in at least one direction
.25W in CDMA/EVDO
APPLICATION NOTES
CDMA/EV-DO 1900
1930 to 1990 MHz
1850 to 1910 MHz
50 ohms
<2
0 dBi in at least
one direction
.25W in
CDMA/EVDO
25
Advertisement
Table of Contents
