ABB Excount II User Manual page 45

5. Transceiver menus
5.1.1 Data transfer from PC to Transceiver
In this mode, Sensor ID's can be transfered from the PC to the
transceiver. Connect the data cable between the transceiver
and the PC.
See also the software help instructions.
Back to transfer data menu
5.1.2 Data transfer from Transceiver to PC
In this mode data collected from the Sensors can be
transmitted to the PC. Connect the data cable between the
transceiver and the PC.
See also the software help instructions.
Back to transfer data menu
5.2 Battery check
Displays the condition of the battery. Always check the
condition of the battery before transfering data to/from the
transceiver. Change battery if necessary.
If the battery expires during a measurement session,data can
0 % 100%
be corrupted or lost.
In such case download the sensor ID's again and take new
readings.
NOTE! Whenever the battery is replaced the transceiver clock
and date must be checked and sychronized with the PC (see
4.4) prior to transfering data or making measurements.
Back to main menu
45
1HSA 801 080-15en EXCOUNT-II Users Manual