Beko OWAMAT 10 Instructions For Installation And Operation Manual page 20

Maintenance • Mantenimiento
Entretien • Manutenção

* EWC 500 =
* EWC 3 08 0 =
0


5
European waste disposal key
Código de residuos europeo
Code européen de déchet
Europese afvalsleutel
European waste disposal key
Código de residuos europeo
Code européen de déchet
Europese afvalsleutel
Procedure
• Place new OEKOSORB filter set near
the unit. Keep the PE packaging of the
new set for putting in the old filters.
• Shut off condensate inlet
• Open the ÖWAMAT cover, and remove
the filter mat and the inlet.
3
• Slowly remove the used pre-filter and
the main filter from the container and
let them drain.
 • Put the drained filter set into the PE
packaging and ensure correct dis-
posal*1.
• Insert a new filter set into the filter
receptacle of the container.
• Insert the filter mat into the pressure
relief chamber and mount th cap.
• Open condensate inlet.
general cleaning of ÖWAMAT
(recommended every 12 months)
- Remove off the cap and remove the
filter mat
- Remove the OEKOSORB filter
- Pump out the container
- Clean the container
- Ensure correct disposal of the liquid.
*
- Replace the OEKOSORB-Filter and
the filter mat
Note:
Do not add any cleaning agents (sur-
factants or flammable cleaners)! They
impair the filter efficiency.
After cleaning, fill the ÖWAMAT unit with
fresh water.
(see 'Putting into operation', page 16).
Spent filters must be properly disposed
of.
After maintenance work
• Open condensate inlet.
(if necessary switch off compressor).
english
ÖWAMAT 10