Calling Up Stored Data (Display) - I.E.M. Heart Beat Instruction Manual

4 Using the "Heart Beat"

4.7 Calling up stored data (display)

Up to 50 measurements are stored automatically by the "Heart Beat".
Press the MENU key twice (approx. 1 second). The last reading saved and your
measurement number (21 in the diagram) will appear on the display. Pressing the
START/STOP key will make the display alternate every 2 seconds between the
values measured and the time of the measurement:
Pressing the START/STOP key again will scan through the stored data. If no key is
pressed during the next 30 seconds, the memory display will stop automatically or
it can be stopped immediately by pressing the MENU key.
This function is available only after readings have been saved to memory!
If no data has been stored, the display will go directly to the "setting time and
date" function.
32