Connectors And Leds - Lenovo G8264CS Product Manual

FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)
FC-GS-6 Revision 9.4 (ANSI/INCITS 463-2010)
FC-BB-5, Revision 2.0 for FCoE
FCP, Revision 12 (ANSI/INCITS 269-1996)
FCP-2, Revision 8 (ANSI/INCITS 350-2003)
FCP-3, Revision 4 (ANSI/INCITS 416-2006)
FC-MI, Revision 1.92 (INCITS TR-30-2002, except for FL-ports and Class 2)
FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
FC-SP, Revision 1.6
FC-DA, Revision 3.1 (INCITS TR-36-2004)

Connectors and LEDs

Figure 2 shows the front panel of the RackSwitch G8264CS.
Figure 2. Front panel of the RackSwitch G8264CS
The front panel of the G8264CS contains the following components:
LEDs that display the status of the switch and the network.
One Mini-USB RS-232 console port that provides an additional means to configure the switch.
One USB port for mass storage devices.
36x SFP/SFP+ port connectors to attach SFP/SFP+ transceivers for 1 Gb or 10 Gb Ethernet connections or
DAC cables for 10 Gb Ethernet connections.
12x Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel or 10 Gb Ethernet connections or DAC
cables for 10 Gb Ethernet connections.
4x QSFP+ port connectors to attach QSFP+ transceivers for 40 Gb Ethernet connections or DAC cables for
40 Gb or 4x 10 Gb Ethernet connections.
One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.
An Ethernet link OK LED and an Ethernet Tx/Rx LED for each Ethernet port on the switch.
RackSwitch G8264CS 12