Connectors And Leds - Lenovo G8264 Product Manual

Standards supported
The switch supports the following standards:
IEEE 802.1AB Data Center Bridging Capability Exchange Protocol (DCBX)
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1p Class of Service (CoS) prioritization
IEEE 802.1s Multiple STP (MSTP)
IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled)
IEEE 802.1Qbg Edge Virtual Bridging
IEEE 802.1Qbb Priority-Based Flow Control (PFC)
IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
IEEE 802.1x port-based authentication
IEEE 802.1w Rapid STP (RSTP)
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3ab 1000BASE-T copper twisted pair Gigabit Ethernet
IEEE 802.3ad Link Aggregation Control Protocol
IEEE 802.3ae 10GBASE-SR short range fiber optics 10 Gb Ethernet
IEEE 802.3ae 10GBASE-LR long range fiber optics 10 Gb Ethernet
IEEE 802.3ae 10GBASE-ER extended range fiber optics 10 Gb Ethernet
IEEE 802.3ba 40GBASE-SR4 short range fiber optics 40 Gb Ethernet
IEEE 802.3ba 40GBASE-CR4 copper 40 Gb Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-duplex Flow Control
IEEE 802.3z 1000BASE-SX short range fiber optics Gigabit Ethernet
IEEE 802.3z 1000BASE-LX long range fiber optics Gigabit Ethernet

Connectors and LEDs

Figure 2 shows the front panel of the RackSwitch G8264.
Figure 2. Front panel of the RackSwitch G8264
The front panel of the G8264 contains the following components:
LEDs that display the status of the switch and the network.
One Mini-USB RS-232 console port that provides an additional means to configure the switch.
RackSwitch G8264 11