Table of Contents
Advertisement
The appliance can be controlled using a remote
control powered by a 1.5 V carbon-zinc alkaline
batteries of the standard LR03-AAA type.
• Do not place the remote control near to heat
sources.
• Used batteries must be disposed of in the proper
manner.
MAINTENANCE
Alarm signal reset
• Switch of the lights and extractor motor.
• Press button T3 for at least 3 seconds, until the
leds start to fl ash.
Cleaning the fi lters
• The fi lters are washable and must be cleaned
when led S1 fl ashes or at least every 2 months
of operation, or more frequently for particularly
heavy usage.
• Remove the fi lters one at a time, supporting
them with one hand and turning the safety
knobs (pull and turn).
• Wash the fi lters, taking care not to bend them.
Allow them to dry before refi tting.
• Replace them and fi x them using the safety
knobs provided (pull and turn).
GB
REMOTE CONTROL (OPTIONAL)
Grease fi lters
CLEANING METAL GREASE FILTERS
17
Advertisement
Table of Contents
