Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Falcon L1 400370
Summary of Contents for Falcon L1 400370
- Page 1 Instruction Manual...
-
Page 3: Recommendations And Suggestions
RECOMMENDATIONS AND SUGGESTIONS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fi... - Page 4 CHARACTERISTICS Hood Type Dimensions Components Ref. Q.ty Product Components Hood Body, complete with: Controls, Light, Blower, Filters Reducer Flange ø 150-120 mm Ref. Q.ty Installation Components Screws 2,9 x 6,5 Q.ty Documentation Instruction Manual Electric Diagram...
-
Page 5: Installation
INSTALLATION Drilling the Support surface and Fitting the Hood The Hood can be fi tted directly to the underside of the Wall units (min. 650 mm above the cooker top) with snap-on side supports, which are set up for a support panel thickness of between 15 mm and 30 mm. -
Page 6: Recirculation Version Air Outlet
• Replace the fi lter support • Screw the fi lter support using the 2 screws 12c (2,9 x 6 ,5) pro- vided. • Replace the grease fi lters make sure that the handle is visible on the outside. DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a fl... -
Page 7: Control Panel
The hood can be switched on pushing directly onto the requested speed without fi rstly having to select 0/1 button. 0/1 Light 0/1 Motor on Speed on Speed on Speed Fixed Flashing Fixed Flashing Control Panel FUNCTIONS Turns lighting on and off. First speed. -
Page 8: Remote Control (Optional)
The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. -
Page 9: Activated Charcoal Fi Lter (Recirculation Version)
Activated charcoal fi lter (Recirculation version) REPLACING THE ACTIVATED CHARCOAL FILTER • The fi lter is not washable and cannot be regene- rated. It must be replaced when led S1 fl ashes or at least every 4 months. The alarm signal will only light up when the extractor motor is switched on.