Operating Instructions - Chefman AVANT SERIES User Manual

Operating Instructions

USING YOUR KETTLE FOR THE FIRST TIME

Fill kettle to the maximum level mark with fresh tap water. Boil and empty the

kettle then wash the interior with water, repeat the above 2 times.

1. Pull out the power cord from the compartment under the base, plug into a

power outlet.

2. Open the lid then fill water into the kettle.

3. Never allow the water to fill above the maximum level indicated in the interior

of the appliance.

4. Close the lid and place the kettle back on the base unit.

5. Switch the kettle on by pressing the switch down, the light will illuminate to

indicate the kettle is heating.

6. The kettle will automatically switch off once the water has boiled and the

indicator light goes off.

NOTE: Wait 30-60 seconds if you need to heat the water immediately after a

boiling cycle.

The power source will only work if the kettle is placed directly on the base unit.

AFTER SALES SUPPORT

888-315-6553

customerservice@chefman.com

USA

MODEL: RJ11-17-CTB

Table of Contents