Advertisement
OPERATING INSTRUCTIONS
BEFORE FIRST USE
1.
Remove all packaging and materials. Be sure that all parts are
included before discarding any packaging.
2.
Pull out the power cable from the compartment under the base,
and place the base on a flat surface. (Make sure the power cable
comes out of the opening in the base so the unit can sit level.)
3.
To rinse the pot of any manufacturing residue, "brew" a pot of
plain water without tea. To do so, lift off the lid and fill the kettle
with water to the MAX line. NOTE: Never fill the water above the
MAX line or below the MIN line indicated on the glass kettle.
4.
Put the lid with the infuser attached (but empty) back in the
kettle. Place the kettle on the power base and plug it into a
power socket.
5.
Press the POWER button. The kettle will default to the Herbal/
Black Tea (100°C) temperature preset as indicated by the red
LED light inside the glass kettle, and the water will automatically
begin heating to the full boil.
6.
After the boil, the kettle will beep, the red LED light will shut off
and the unit will automatically power off.
7.
Empty the kettle and rinse it with clean water. The kettle is now
ready for use.
10
Advertisement
