Advertisement
OPERATING INSTRUCTIONS
BEFORE FIRST USE
For best results, follow these steps before using your kettle for the first time.
1.
Remove all packaging materials, such as plastic bags and foam inserts.
Check to ensure that all parts and accessories are included before
throwing out packaging.
2.
Read and remove any stickers on the kettle except for the rating label,
which should remain on the unit.
3.
Pull the power cord out from the compartment under the base and place
the base on a flat surface. (Pull the power cord through the opening in
the base so the unit can sit level.) Open the kettle lid by grasping the lid
handle and gently pulling it up.
4.
Prime the kettle before first use and clean it of any packing debris: Add
1/2 cup distilled vinegar to the kettle, then fill the kettle with water just up
to the MIN line. CAUTION: Filling the kettle above the MIN line with this
mixture can cause overboiling and spillage out of the pot.
5.
Close the lid, place the kettle on the base, and plug it into an outlet.
6.
Press the BLACK/HERBAL (212°F) preset button to bring the mixture to
a boil. After the boil, allow the kettle to cool before emptying it, then refill
the kettle with fresh water and bring it to a boil again.
7.
Once complete, empty the kettle and rinse with clean water. It is now
ready for use.
10
Advertisement
