Lifeloc FC20 Operation Manual page 24

User Settings
5. ENTERING A SUBJECT I.D.
From the "Settings" display, press the Execute but-
ton.
Press the Function button until the display reads
"I.D. Setting".
Press the Execute button to select "Subject +
Batch", then, press the Function button once. The
display will read "Batch I.D."
Press the + and – buttons to enter numbers/letters
of the Batch I.D. (hold down to scroll quickly).
Press the Execute button to move to the next digit.
Up to 16 characters may be entered.
Press the Function button to save the changes and
return to the testing mode.
The FC20 will now prompt you to enter a Subject
I.D. using the + and - buttons before every test.
Use the + and – buttons to enter numbers/letters
(hold down to scroll quickly).
Press the Execute button to move to the next digit.
Up to 16 characters may be entered.
Press the Function button to proceed to take a test.
The Subject I.D. will be stored and printed with the
next test taken.
To by-pass entering a Subject I.D., simply press the
Function button and take a test.
Page 24
User Settings
5. ENTERING A SUBJECT I.D.
From the "Settings" display, press the Execute but-
ton.
Press the Function button until the display reads
"I.D. Setting".
Press the Execute button to select "Subject +
Batch", then, press the Function button once. The
display will read "Batch I.D."
Press the + and – buttons to enter numbers/letters
of the Batch I.D. (hold down to scroll quickly).
Press the Execute button to move to the next digit.
Up to 16 characters may be entered.
Press the Function button to save the changes and
return to the testing mode.
The FC20 will now prompt you to enter a Subject
I.D. using the + and - buttons before every test.
Use the + and – buttons to enter numbers/letters
(hold down to scroll quickly).
Press the Execute button to move to the next digit.
Up to 16 characters may be entered.
Press the Function button to proceed to take a test.
The Subject I.D. will be stored and printed with the
next test taken.
To by-pass entering a Subject I.D., simply press the
Function button and take a test.
Page 24