Table Of Contents - Axis 210 Installation Manual

AXIS HOV Housing VT
AXIS HOV Housing VT
Follow these instructions to complete the installation of the AXIS HOV Housing and Axis
network camera:
1. "Package contents" on page 4
2. "Install the bracket" on page 5
3. "Install the power supply in the housing" on page 6
4. "Install the camera in the housing" on page 7
5. "Connect the power cable to the camera" on page 8
6. "Route the cables to the housing" on page 9
7. "Attach the housing to the wall bracket" on page 9
8. "Connect the 100-240V AC power cable to the housing" on page 10
9. "Complete the installation" on page 10
Warning!
High voltage - the electrical connection should be made by an authorized electrician.
Please observe relevant national and local regulations for the installation.
Axis Network Cameras
The following camera models are supported:
Camera Model:
• AXIS 210
• AXIS 210A
• AXIS 211
• AXIS 211A
• AXIS 211M
• AXIS 211W
• AXIS 221
• AXIS 223M
Note:
Before you begin, make sure that the AXIS HOV Housing package contents, power sup-
ply and the required cables, tools and documentation are available.
See "Package contents" on page 4.
Comment:
- Indoor use only
- Indoor use only
- Outdoor/Indoor
- Outdoor/Indoor
- Outdoor/Indoor
- Outdoor/Indoor, external antenna required, see www.axis.com
- Outdoor/Indoor
- Outdoor/Indoor
Page 3