Contents Of The Product; Description Of The Product; First Use From New - Numaxes CANICOM 200 User Manual

● Contents of the product
Inside the packaging you will find:
1 receiver collar CANICOM fitted with short contact points
▪
1 lithium 3 Volts CR2 battery for the collar
▪
1 remote control CANICOM 200 fitted with 1 lithium 3 Volts CR2430 battery
▪
1 neon test lamp
▪
1 pair of long contact points
▪
1 carry strap
▪
1 DVD
▪
This user's guide
▪
● Description of the product
Continuous stimulations
limited to 8 seconds
Flash stimulations
lower than 1 second
Adjustment of the level
of the stimulations
Indicator of radio
transmission
Battery level indicator
● First use from new
Fitting the battery in the receiver collar
Unscrew the 4 screws of the top of CANICOM using a screwdriver.
▪
Insert the battery (3V Lithium CR2) paying attention to follow polarity indicated on the
▪
battery housing (ref. Diagram4). The tab is under the battery.
A beep sound (low pitch) is emitted, indicating the correct installation of the battery.
▪
CANICOM 200 – User's guide – indice C
switch magnet
REMOTE CONTROL
Diagram 1
LCD SCREEN
Diagram 3
On/Off
switch
LCD screen
Red mark:
Area where
the On/Off
is located
RECEIVER COLLAR
THT level indicator
from 1 to 9
2 contact points
(short or long)
On/Off indicator
indicator of
radio reception
Diagram 2 battery level
+
+
indicator
4/12