Technical Specifications - Numaxes CANICOM 200 User Manual

If you encounter any problems, re-code the receiver collar (ref. re-coding procedure).
Reinitialize the system by removing the battery from its housing, then with a metallic tool (e.g.
screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).
Insert the battery again: one beep is emitted, indicating the battery is in correct position
Restart your CANICOM using the remote control.
If the problem persists, contact your distributor.
According to the extent of the malfunction, you may have to return your product for check and repairr.
For all repairs, please supply the following:
the complete product
-
the proof of purchase (invoice or sales receipt)
-
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
incurred.
● Technical information
Power :
Battery life :
Frequency (Power) :
Antenna :
Range :
Tightness :
Radio operator safety and
coding:
Indicator of wear of the
batteries:
Level of sanctions :
Use temperature :
Dimensions : L x H x D.
Weight (with the battery)
CANICOM 200 – User's guide – indice C
Reset: connect the 2
supports of the battery
Diagram 7
Remote control
1 3-V lithium battery CR2430
Continuous use:
approximately 50 000 triggers
915 MHz (0.75 mW)
Integrated
approximately 250 yards
Showerproof
by micro-controller
Indicator on LCD screen
9
between – 5°F and +104°F
1.7" x 3.8" x 0.7"
1.7 oz
.
Receiver collar
1 3-V battery CR2
In stand by: approximately 7
months
Continuous use: approximately 2
months
915 MHz
Integrated
Waterproof
by micro-controller
Indicator light
between – 5°F and +104°F
2.6" x 1.5" x 1.6"
2.6 oz (without strap)
Collar adjustable to neck sizes from
8" to 21.5"
10/12