Table of Contents
Advertisement
64
Chapter 7 Example
Step3: Configure LAN group1 IP address.
Click "Setup/LAN/LAN Group" to display the window as shown
in Figure 64. The Ethernet and WLAN interfaces are in group1
by default.
Figure 64 LAN Configuration
Step4: Enable DHCP Server and configure the DHCP pool.
Click "Setup/LAN/DHCP" to display the window as shown in
Figure 65.
Figure 65 DHCP Configuration
Step5: Configure SIP. Click "Setup/VoIP/SIP" to display the
window as shown in Figure 66.
64
Advertisement
Table of Contents
