Table of Contents
Advertisement
Fields
Frag
Threshold
Configure WLAN Security
From the navigation tree, click "Security" to display the window
as shown in Figure 20.
Figure 20 WLAN Security
•
None: No security settings
•
WEP
Select the "WEP" to display the window as shown in Figure 21.
WEP encryption uses a static secret key. Each wireless station
uses the same key to access the wireless network.
NetSprite1023 supports 64-bit or 128-bit static WEP encryption
to prevent illegal access.
Chapter 5 Setup Configuration
Description
Fragment threshold is used to
improve the efficiency in a high
volume wireless network. Any
packet greater than this value
will be fragmented. Choose a
setting within a range of 256 –
2346 bytes.
31
Default
2346
31
Advertisement
Table of Contents
