Table of Contents
Advertisement
24
Chapter 5 Setup Configuration
•
PPPoE
Table 4 PPPoE Description
Fields
Description
Select "New" to set up a new
Choose a
connection. All the connections are
connection
listed in the box.
Possible values: PPPoE, PPPoA,
Type
Static, DHCP, Bridge, CLIP
Possible values: Disable, Enable, LAN.
Disable: Each PVC of the connection
should be different.
Sharing
Enable: Multiple connections share the
same PVC.
VLAN: VLAN tag is attached to the
connection.
Possible values:
UBR: Unspecified Bit Rate
QoS
CBR: Constant Bit Rate
VBR: Variable Bit Rate
Priority Bits
Possible values: 1-7
Username/
The service provider offers them for
Password
PPPoE connection.
The maximum period that the CPE
Keep Alive
initiates connection request
Enable "Set Route" and the gateway IP
Set Route
address the CPE obtained is taken as
the CPE default gateway.
VPI/VCI is needed for each
VPI/VCI
connection. The value is compliance
with the setting of DSLAM
24
Default
Disable
UBR
1
10 min
Advertisement
Table of Contents
