Table of Contents
Advertisement
40
Chapter 5 Setup Configuration
Configure LAN
LAN configuration includes LAN Group, DHCP, IP, Client and
Isolation configuration.
Configure LAN Group
From the navigation tree, click "LAN Group" to display the
window as shown in Figure 31.
Figure 31 LAN Group
NetSprite1023 provides LAN groups. Users can set different IP
addresses to each group. The Ethernet and WLAN interfaces
are of the same IP address by default (192.168.1.1) in LAN
group 1. USB is unavailable.
Select one interface and click <Remove>, it will be removed to
the "Interface" box. The <Add> button is to remove the interface
from the "Interface" box to the designated LAN group.
40
Advertisement
Table of Contents
