Table of Contents
Advertisement
46
Chapter 5 Setup Configuration
Configure Access Control
From the navigation tree, click "Access Control" to display the
window as shown in Figure 40. Users can select service names
under the "WAN" and "LAN" to implement access control from
WAN or LAN interface.
Figure 40 Access Control
Users can set IP addresses that only these IP addresses can
access the CPE. Enter an IP address in the "New IP" box and
Click <Add>. The IP will appear in the "IP Access List" box.
Configure UpnP
From the navigation tree, click "UpnP" to display the window as
shown in Figure 41. Users should enable the function when the
applications need UPnP support such as MSN.
46
Advertisement
Table of Contents
