M.z-Finity™ Footrest System - Quickie 2 Owner's Manual

Q U I C K I E 2
M. Z-FINITY™ FOOTREST SYSTEM
CAUTION– The Z-Finity™Footrest system is rated to 165lbs (75kg)
With the footrest system, Sunrise Medical offers either a single Flip-up Footplate (B), or dual footplates (C)
that are able to accomodate all of the possible heights and adjustment angles that the rider may require
for their comfort and support.
Z-FINITY™ SWING-AWAY FOOTREST
The footrest system can also accomodate a swing-away hanger(D) with dual footplates (C) that are both
height adjustable and angle adjustable.
Swing-in-Swing-out Hangers and Footrests (80°)
1. Basic Footrest Installation
a. From the side, place the pivot (E) into the top of the frame tube which guides the hanger into the
cor-rect alignment with the locking plate (F) on front frame tube.
b. Rotate the footrest towards the front of the chair until it locks into place on locking plate.
2. Removal
a. To remove footrest, release latch (G) by pulling lever upward or pushing lever downward.
b. Rotate footrest inward or outward and lift.
24 25
25 26
19
VIII. USE AND MAINTENANCE
D
E
F
MK-100070 Rev. E
24
25
26