Mounting On A Bypass, Bridle, Or Still Well; Figure 12: Bypass Installation - Honeywell SLG 700 Quick Start Manual

Mounting on a bypass, bridle, or still well

The SLG 700 transmitter can be mounted in a new or existing bypass pipe, bridle, or a
side pipe, see
Figure
This type of installation is often simpler and allows the addition of radar level
measurement to an otherwise busy installation. A similar installation is also possible inside
the main container, when installing the SLG700 transmitter on a stilling well.
N = Pipe diameter
D = Bypass diameter (N < D)
L = Effective measurement range (L must be >= 12"
December 2017
12.

Figure 12: Bypass Installation

Quick Start Installation Guide 21