Table 2 Console port specifications
Specification
Interface standard
Cable type
Baud rate (bps)
Management Ethernet port
You can use the 10/100Base-TX management Ethernet port on the
OSN|M's front panel for management only; not for exchanging data. Use
this port to log into the OSN|M's Linux system through SSH, and then to
configure the Linux system. Refer to Table 3 for the management
Ethernet port specifications.
Table 3 Management Ethernet port specifications
Specification
Connector type
Number of connectors
Interface standard
Cable type
Working mode
Supported frame format
Description
EIA/TIA-232
Asynchronous serial port cables
300
■
1200
■
2400
■
4800
■
9600 (default)
■
19200
■
38400
■
56000
■
115200
■
Description
RJ45
1
IEEE 802.3u
Category 5 cables (forward compatible)
Full/half duplex
■
10/100 Mbps autosensing
■
Ethernet_II
■
Ethernet_SNAP
■
Front Panel 11