3Com 5500G Getting Started Manual page 29

Configuring the TFTP
Server
Figure 5 Network diagram for an Ethernet installation through Eth1
TFTP Server
IP network
DHCP Server
Figure 6 Network diagram for Ethernet installation through the management
Ethernet port Eth2
TFTP Server
IP network
DHCP Server
Complete the following configuration procedure on the TFTP server:
1 Ensure that there is network connectivity between the TFTP server and the
switch installed with the OSN|M module.
2 Enable TFTP on the TFTP server, and store the configuration file and the
installation files listed in Table 8 on the TFTP server. (These files are
Installing the Linux System through an Ethernet Connection 29
Internal connection
between the OSN|M and the switch
GE 1 / 1 / 2
Switch with OAP
GE 1 / 0 / 2
on switch
Switch with OSN|M
Management
Ethernet port
( Eth 2 ) on OSN|M
Eth 1
Console
on OSN|M
Controller
Console
Controller
on OSN|M