Mounting The Siren - Dometic MS680 Installation And Operating Manual

MS680
7.2

Mounting the siren

See fig. 6
The siren can be mounted in the engine compartment.
A
NOTICE!
When mounting it, ensure that the installation location is
• Not in an area exposed to splashing water
• Not near the exhaust system
• Not accessible from underneath the vehicle, to ensure that it cannot
be tampered with.
➤ Install the siren and the holder as shown in fig. 6.
7.3 Installing the ultrasonic module
See fig. 5
➤ Install the ultrasonic module as illustrated in fig. 5.
7.4 Installing the ultrasonic sensors
See fig. 7
!
CAUTION!
Risk of injury if the airbag deploys!
Do not fit the ultrasonic sensors where an airbag may open.
➤ Align the ultrasonic sensors so that they point towards the centre between the
backrests of the front seats (of the passenger compartment).
➤ Lay the connecting cables of the sensors through the A-pillar to the ultrasonic
module.
EN
Installing the alarm system
11