Intended Use; Technical Description - Dometic MS680 Installation And Operating Manual

Intended use

5 Intended use
MS680 (ref. no. 9101600012) is an alarm system and preset for a Fiat Ducato x290
(manufactured in 2015). Optionally, the alarm system can also be used for a Fiat
Ducato x250 (manufactured in 2011). For the connection data for a Fiat
Ducato x250, refer to chapter "Connection data for Fiat Ducato x250 (without
connection to the central locking system)" on page 15.
The alarm system offers additional protection against the theft of your vehicle and its
contents.
6

Technical description

6.1 Function description
MS680 is an alarm system with two ultrasonic sensors and a siren. The alarm system
can optionally be extended by up to 55 wireless infrared motion detectors and wire-
less magnetic contact switches. It is designed for vehicles with a voltage of 12 V and
is enabled or disabled when operating the original vehicle remote controls.
When the alarm system is activated, an alarm is triggered when one of the following
events occurs:
• A door opens.
• The boot is opened.
• The bonnet is opened.
• The ignition is turned on.
• An (optional) wireless sensor (radio magnetic contact, wireless motion) reports
movement.
The product offers you the following features:
• Activation and deactivation with original vehicle remote control
• Programmable acoustic and optical signals
• Interior monitoring of the passenger compartment using ultrasonic sensors
• Additional remote control to deactivate the interior monitoring
• E-key (electronic key) for programming and deactivating the alarm system
• Input for the connection of additional door contacts or a contact switch for the
bonnet or the boot.
8
MS680
EN