Silvercrest 281566 Operating Instructions And Safety Instructions page 17

Fault
The Bluetooth
®
connection cannot be
established.
The remote control
does not work.
NOTE
► If you are unable to resolve the problem by applying any of the aforemen-
tioned methods, please contact the Customer Service department.
■ 14 │
GB
Possible cause
is not
®
Bluetooth
activated on the play-
back device.
It is possible that not all
of Bluetooth devices
®
are compatible.
The playback device
is not paired with the
device.
The distance between
the device and the
playback device is
too great.
operation
®
Bluetooth
is deactivated on the
speaker.
The remote control is
pointing the wrong way.
The distance between
the remote control and
the device is too great.
The battery in the remote
control is flat.
Remedy
Switch on Bluetooth
playback device. Please refer to its
operating instructions for more infor-
mation.
Check the settings on your Blue-
device.
®
tooth
Pair the devices again (see chapter
Pairing the device with a
playback device).
®
Bluetooth
Ensure that the device is no more than
10 metres away from the playback
device.
Press the button on the remote
control or press the FUNCTION
button on the device to switch on the
function.
®
Bluetooth
Point the remote control towards the
infrared sensor on the front of the
device.
Move the remote control closer to
the device.
Replace the battery.
on your
®
SSTB 10 A1