Table of Contents
Advertisement
•
'Auto reply': Enabling this option allows the user to send every received frame back to the
transmitter.
•
'Not received': Indicates the number of messages that were not received by the unit during the
dialog.
•
'Nb msg sent': Provides the number of messages sent to the other module.
•
'Elapsed time': Specifies how long the modem has been transmitting when the send continuously
option is enabled.
•
'Errors': Provides the number of errors occurring during a transmission. Those errors are counted
in characters.
•
'Send' button: Sends the frame previously entered by the user in the 'data to send' field to the
other module.
•
'Clear Send' button: Clears the 'data to send' field as well as the 'received data' field of the other
module.
•
'Stop' button: Stops a permanent transmission (when 'send continuously' is enabled).
The two other buttons at the bottom of the window are general for both modules:
•
'Display' button: Displays a summary of the dialog established between the two radio units:
•
'Clear All' button: Clears all the window's fields (described above).
•
'Exit' button: Quits the peer-to-peer dialog window.
Copyright Adcon RF Technology 2002
LC-Ind Modems Technical Manual
Rev: 1.0
Page: 17
Advertisement
Table of Contents
