Table of Contents
Advertisement
3.2 Peer-to-peer dialog
The first tool available with the MTC software is the peer-to-peer dialog tool, allowing the user to
communicate between two compatible radio modules. From the menu bar, the 'Peer-to-peer' menu is to
be selected.
3.2.1 Configuration
From the menu bar, the 'Peer-to-peer/Configuration' submenu has to be selected. A window
allowing the user configuring two compatible radio units for peer-to-peer dialog is displayed:
Both operating mode and communication channel should be chosen by the user. Once the
configuration is done, pressing 'OK' or 'DIALOG' allows the user to validate it:
If 'OK' was pressed, pressing 'Yes' quits the peer-to-peer configuration window and the user has
then to select the peer-to-peer dialog tool either from the menu bar or the tool bar. If 'DIALOG' was
pressed, pressing 'Yes' opens the peer-to-peer dialog window (See paragraph 7.2). Pressing 'No' cancels
the configuration in both cases.
Copyright Adcon RF Technology 2002
LC-Ind Modems Technical Manual
Rev: 1.0
Page: 15
Advertisement
Table of Contents
