.1.3 The application Tree
3
Once the auto configuration is done, the software builds and displays the application tree using
the serial ports defined in the system, the connected modems detected during auto configuration and the
modem configuration files found in the application configuration file.
The application tree is composed of two windows that can not be closed: the 'Tree' window and
the 'About Ports' window. They are described below:
Note:
The application tree, i.e. the Tree window especially, can not be exploited in basic user level
configuration. In basic level configuration, the Tree is just used as information.
Copyright Adcon RF Technology 2002
LC-Ind Modems Technical Manual
Rev: 1.0
Page: 13