Favorite Channel Scan - Radio Shack 4-in-One Smart Light-Up Remote Control Owner's Manual

15-1993.fm Page 12 Wednesday, October 20, 1999 12:03 PM

FAVORITE CHANNEL SCAN

You can use your remote control to scan
through up to 10 of your favorite channels on
your TV, VCR, or cable box.
Note: You can scan channels only for one de-
vice (TV, VCR, cable converter) at a time. You
cannot set up a favorite channel list for another
device until you clear the existing list.
1. Press the device key for the device with
the channels you want to program (
, or ). The red light blinks.
VCR CBL
2. Hold down until the red light blinks twice,
P
then press .
9 9 6
3. Enter the channel number of the first chan-
nel you want to include in your favorite
channel list. Then press
Notes:
• Precede a single-digit number with a 0
(for example, 01, 02, and so on).
• If you enter a three-digit number, you do
not need to press
number.
• If your TV requires an ENTER key when
entering a channel number, press
after you enter the channel num-
ENTER
ber.
4. Repeat Step 3 for other channels (up to
10) you want to include in your list. Then
hold down until the red light blinks twice.
P
5. To scan through the favorite channel list,
press the device key for the device you
want to tune ( ,
TV VCR
. The remote control repeatedly
SCAN
scans through the favorite channel list,
12
,
TV
.
P
after entering the
P
, or ), then press
CBL