Configuration; Warnings - Honeywell OWA 100 OneWireless User Manual

Hide thumbs Also See for OWA 100 OneWireless:
Table of Contents

Advertisement

3. Configuration

3.1. Ssfety Messages
3.1
Ssfety Messages
These instruction procedures may require special precautions to ensure the safety of the personnel
performing the operations. Information that potentially raises safety issues is indicated by a warning
symbol (
). Please refer to the following safety messages before performing an operation preceded by
this symbol.

Warnings

10
3. Configuration
Failure to follow these instructions could result in death or serious injury.
Make sure only qualified personnel perform the installation.
Explosions could result in death or serious injury.
Before connecting the OWA 100 OneWireless Adaptor in an explosive
atmosphere, make sure the instruments are installed in accordance with
intrinsically safe or nonincendive field wiring practices.
Verify that the operating atmosphere of the transmitter is consistent with the
appropriate hazardous locations certifications.
Electrical shock could cause death or serious injury.
• Use extreme caution when making contact with the leads and terminals.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: This device may not cause harmful interference. This device must
accept any interference received, including interference that may cause undesired
operation.
This device must be installed to ensure a minimum antenna separation distance of 20
cm from all persons.
OWA 100 Adapter User Manual
WARNING
Replace with attached page.
Rev. 1
September 2010

Advertisement

Table of Contents
loading

Table of Contents