Configuration; Figure 3-4 Owa 100 - Two-Wire Configuration; Figure 3-5 Owa 100 - Two-Wire Configuration With Resistor - Honeywell OWA 100 OneWireless User Manual

3.4

Configuration

The OWA 100 Adapter contains the electronics interface compatible for connecting to the OneWireless
network. An operator uses the Wireless Builder application to configure blocks and to change operating
parameters. These changes are written to the OWA 100 Adapter when it is authenticated by a security key.
No local configuration of device is required.
Figure 3-5 OWA 100 – TWO-WIRE CONFIGURATION WITH RESISTOR
Rev. 1
September 2010
Figure 3-4 OWA 100 – TWO-WIRE CONFIGURATION
OWA 100 Adapter User Manual
3. Configuration
3.4. Configuration
13