1. Introduction
1.5. About the OWA 100 OneWireless Adapter
1.5
About the OWA 100 OneWireless Adapter
The OWA 100 Adapter is designed with an OneWireless interface to allow wired HART devices to
operate in a compatible distributed OneWireless system. The adapter will interoperate with any
OneWireless-registered device and provide the HART diagnostic and process information to any
ISA100.11a compliant system.
The OWA 100 Adapter includes OneWireless electronics for operating in a 2.4GHz network.
Outputs
The Process Variable (PV) is available for monitoring and alarm purposes. Available PV update rates are
1, 5, 10, 30 seconds and are set on Wireless Builder. Slower update rates extend battery life.
Figure 1 shows a block diagram of a OWA 100 Adapter's operating functions.
2
Figure 1-1 OWA 100 Adapter Functional Diagram
OWA 100 Adapter User Manual
-002
50050078-001
Rev. 1
September 2010