Controls & V-Nail Components - Grizzly T27577 Owner's Manual

Controls & V-Nail
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–2 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Table Controls
A
J
Figure 1. Table controls.
A. Fence Stop & Lock Handle: Locks fence
setting for consistent V-nail placement.
B. Pressure Bar Lock: Locks pressure bar
position over frame.
C. Pressure Bar: Adjusts height of pressure
pad over workpiece. Bar may be hand-
turned, or the quick-release button can be
used for faster vertical bar adjustments.
-4-
manual BEFORE
B
C
D
E
F
G
H
I
D. Quick-Release Button: Releases pressure
bar for fast height adjustment over workpiece.
E. Pressure Pad: Holds workpiece firmly from
above as V-nail is inserted from underside of
table. Two pressure pads are included: round
and 90°. Pads thread into bottom of vertical
pressure bar and contact top of workpiece
while V-nail is inserted.
F. V-Nail Depth Indicator Light: Illuminates
when V-nail reaches proper depth.
G. Fence: Adjusts in or out depending upon
workpiece size. Fence angle is 90°.
H. Front Clamp: Secures inside angle during
V-nail insertion. Features two independently
adjustable gripping faces for securing odd-
shaped miters.
I. 120° & 135° Inserts: Place against fence for
clamping 6- and 8-sided frames.
J. Tool Tray: Holds tools and V-nails.
L
K
M
Figure 2. Stand controls and V-nail dial.
K. V-Nail Height Dial: Adjusts V-nail driver
depth depending upon size of V-nail used.
Turn dial clockwise for smaller V-nails. Turn
dial counterclockwise for larger V-nails.
L. Pressure Bar Foot Pedals: Controls down-
ward force of pressure bar.
M. Front Clamp Foot Pedal: Controls front
clamp pressure.
Model T27577 (Mfd. Since 3/16)
L