Recalling Values From Memory; Clearing Values From Memory - HoMedics BPW-360BT Manual

RECALLING VALUES FROM MEMORY

This monitor can be used by two individuals. Each user
can store up to 60 measurements.
1. Press and hold the MEM button for 3 seconds to
choose - User 1 or User 2. (User 1 or User 2 will
start blinking). Pressing the MEM button will toggle
between the user selection. Press the SET button to
confirm entry.
2. Once the user is selected, press the MEM button to
access the memory.
MEMORY REVIEW
MEMORY REVIEW
3. The monitor will first display the calculated average
applied to the last 3 memories.
MEMORY REVIEW
4. Every new press of the MEM button will recall a
previous reading. The latest reading will be
recalled first.
MEMORY REVIEW
5. Press the SET button to go back and view more
recent readings.
LAST 3 AVG.
MEMORY REVIEW
23

CLEARING VALUES FROM MEMORY

While in Memory Recall mode, press and hold the MEM
and SET buttons at the same time for 3 seconds and
the data will be erased.
MEM MEM
SET SET
24