Fix The Dome Cover To The Housing - Axis T95A00 Installation Manual

Page 6

Fix the dome cover to the housing

Place the fastening ring over the dome. Insert the four
10mm M3 screws, so you hold the ring, the dome
cover, and the gasket together. Fix the dome cover
(transparent or smoked) at the bottom of the housing.
AXIS 213 PTZ, AXIS 214 PTZ, and AXIS 215 PTZ power connection
Connect the (provided) power cable to the 12 VDC output as shown in the picture.
Network camera power cable
AXIS T95A00/T95A10 Dome Housing output 12V DC
Camera power cable
black
red
brown cable
Housing power connector
GND
12 V
AXIS T95A00/T95A10 Dome Housing
Fastening ring
Dome
Rubber gasket
Housing
12V DC
power connector
fastening ring