Sanyo LCD-32XH3 Service Manual page 29

Mechanical Disassembly
3. Circuit Board Removal
1.
Remove 9 screws and take ASSY, PWB, POWER off.
2.
Remove 7 screws on the circuit board and 3 screws that are fixing the Terminal Holder. Then take ASSY, PWB, MAIN
off with Terminal Holder.
Terminal
Holder
3.
Remove 2 screws and take ASSY, PWB, KEY off from the Cabinet Front with Top Cover.
And remove 3 screws to take ASSY, PWB, KEY off from Top Cover.
ASSY, PWB, POWER
ASSY, PWB, MAIN
Top Cover
ASSY, PWB, KEY
-29-