On-Screen Service Menu System; Service Adjustments - Sanyo DP19648 Service Manual

GENERAL
This set has an On-screen Service Menu system included in
the CPU that allows remote operation for most of the ser-
vice adjustments.

ON-SCREEN SERVICE MENU SYSTEM

1. Enter the Service Menu:
•∑
Turn off the receiver and disconnect the AC power
supply.
•∑
While pressing the Volume (–) button on the televi-
sion, reconnect the AC power supply. The Service
Menu will now appear. The remote can now be used
to make adjustments. See Figure 1 below.
ITEM NO.
0 8 6
Figure 1. Service Menu Display

2. Service Adjustments:

Press the Cursor L or M key to select the desired
∑•
service menu item you want to adjust. See page 4
for the On-screen Service Menu.
∑•
Use the Cursor < or > key to adjust the data.
The < or > key will increase or decrease the data
sequentially.
3. Exit from the Service Menu:
∑•
Press the MENU key to turn off the Service Menu
display.
SERVICE ADJUSTMENTS
HEX DATA
TITLE
V O L 3 0
Menu:
Exit Service Menu
Cursor < >:
Adjust the data
Volume –
– 3 –
:
Enter Service Menu
Cursor LM:
Select Item