1. Manuals
  2. Brands
  3. Valeo Manuals
  4. Automobile Accessories
  5. beep & park
  6. User manual

Valeo Beep & Park User Manual

Hide thumbs Also See for Beep & Park:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
What is it ?
Camera module that supervises all 4 driving assistance functions :
• Lane departure alert
• Keep in lane assistance
• Video recording of a potential accident
• Alert that vehicle in front has moved away
How does it work ?
• All four functions are housed in the camera module, facing the road.
• The system starts automatically as soon as the vehicle starts and scans the road permanently.
• All of the guideo functions can be easily configured or switched off using the remote control.
1) The Lane alert function uses an algorithm to detect when
the vehicle crosses white road markings and immediately informs
the driver with an audible alert or voice message. A warning is
given as soon as the vehicle crosses the line, leaving the driver
enough time to regain control of the vehicle.
2) The Optilane function uses an algorithm to spot any vehicle
drift in relation to the road markings and immediately informs the
driver, who can then correct the trajectory accordingly. The driver is
informed as soon as the vehicle drifts to the left or the right for more
than 5 seconds.
The Lane Alert and Optilane functions are deactivated
when the driver uses the indicators. The system is compatible
with white and yellow road markings.
3) The Video box function films 20-second video sequences in
the event of sudden acceleration or deceleration. The system
films the moments immediately before and after an impact.
The videos can then be transfered to a PC via a USB
connection, to be viewed or sent.
The Video box system can also be switched on manually
by the driver at any time.
4) The Beep&watch function uses a change in images to
identify movement in front of the vehicle, and informs the driver
when the car in front has moved off. The system comes on after the
vehicle has been at a standstill for 3 seconds.
Product description
1/11

Advertisement

Table of Contents
loading

Related Manuals for Valeo Beep & Park

Summary of Contents for Valeo Beep & Park

  • Page 1 1/11 Product description What is it ? Camera module that supervises all 4 driving assistance functions : • Lane departure alert • Keep in lane assistance • Video recording of a potential accident • Alert that vehicle in front has moved away How does it work ? •...

  • Page 2: Product Description

    2/11 Product description Product contents Camera module : • A single multi-function camera. • Visual and vocal alerts. • LED screen integrated on the back of the module. • Integrated loud speaker. • Detachable camera for protection against theft. • Works in poor light (< 1 lux). Remote control: •...

  • Page 3: Easy To Install

    3/11 Product advantages Easy to install Ready-to-use product for quick and easy installation: • All wiring cables and cable clips supplied. • Easily positioned camera module, thanks to the template supplied. • Quick and easily fitted camera module, thanks to the self-adhesive patch. •...

  • Page 4: Preparing For Installation

    4/11 Installation guide Installation time 1 hour Tools required: 1. Wire stripper pliers Kit components: 2. Screwdriver set 1. Camera module 3. Insulating adhesive tape 2. Power cable 4. Wire-cutting pliers 3. USB cable 5. Multimeter 4. Positioning template 6. Soldering iron 5.

  • Page 5: Installing The Camera Module

    5/11 Installation guide 2. Installing the camera module • Clean and degrease the interior of the windscreen • Position and stick the template provided under the central rearview mirror There are two possible configurations: Windscreen-mounted central rearview mirror: position the template, sliding the larger notch under the mirror mounting Ceiling-mounted central rearview mirror: position the template on the central line at the top of the windscreen,...
  • Page 6 6/11 Installation guide 3. Connecting guideo • Disconnect the battery: Switch off the engine first. Wait for 2 minutes before you disconnect the battery, to give the vehicle's computers sufficient time to power off completely. • Connect the power cable (RJ45 connector) to the camera module.
  • Page 7 7/11 Installation guide 4. Start-up & operating test • Reconnect the battery and switch on the engine again: On multiplexed vehicles, wait for 1 minute before switching on the engine, to ensure that the vehicle's computers are reinitialised properly. • Check that the camera module switches on and off with the engine.

  • Page 8: Final Adjustments

    8/11 Installation guide 5. Final adjustments • Selection of the vehicle type : This button is used to set the vehicle type. Make sure that it is set correctly; a faulty setting can undermine the performance of guideo. The vehicles are classified according to the height of the camera module and the vehicle width.

  • Page 9: After Installation

    9/11 After installation Guideo user manual See the user manual on the CD-ROM supplied with the product Recommandations in daily use Keep guideo dry when cleaning the vehicle interior. Water can damage the electronic circuits and cause fire or electric shock. Avoid contact with chemicals and detergents, which can damage the surface of guideo and the internal circuits.

  • Page 10: Troubleshooting

    10/11 After installation Troubleshooting No sound comes out of the device : Check if the power cable is correctly connected. If the power is not connected, no display comes on. Check if all the functions are disabled. Check if the sound level is minimized. If the sound level is low in noisy environment, the sound may not be heard.
  • Page 11 The internal electronic circuit and speaker may generate some heat without a breakdown. Warnings occurs while lane departure and turning signal activated Check the correct connection of the turning signal (see 3.5 section) Valeo may not be held responsible for the incorrect installation or misuse of the products.

Table of Contents