Planet DHR-800 User Manual page 8

The kinds of cables that can be used with a 100Base-TX Class II Fast
Ethernet hub are
♦ Category 5 unshielded twisted-pair cable, and ( Category 5 UTP)
♦ Type 1 shielded twisted-pair cable (Type 1 STP )
•
100Base-TX Fast Ethernet Summary
Be sure to remember the following rules about a 100Base-TX Class II Fast
Ethernet hub:
1. All end nodes connected to the hub must have 100Base-TX Fast
Ethernet interface cards.
2. Only Category 5 UTP or Type 1 STP cables may be used to connect and
nodes to the hub. The cables must be straight-wired.
3. To expand a network built around one Fast Ethernet hub, you can
connect the hub to one and only one other 100Base-TX Class II hub.
4
NOVA100 Series