Candy CCT 685/2 X User Manual page 9

7. Fully tighten the support screws (A) and then screw the anchoring
screws (B) through the relevant holes in the cooker hood. Fully tighten
the anchoring screws into the wall.
8 Plate I and II are used to fix the chimney on he wall. Put the inner chimney on the
outer chimney. Then pull the inner chimney upwards. Install plate I on the chimney
by two screws (4 mm x 8mm).
Place the chimney on the cooker hood and determine the location of plate I and II.
Drill holes to accommodate plate I & II.
Fix plate II on the wall by two screws (4mm x 40mm) and wall plugs.
8