Advertisement
Never use the tool with other than compressed air.
If bottled gas (carbon dioxide, oxgen, nitrogen,
hydrogen, air, etc.) or combustible gas (hydrogen,
propane, acetylene, etc.) is used as a power source
for this tool, the tool will explode and cause serious
injury.
Always check the tool for its overall condition and
loose screws before operation. Tighten as required.
Make sure the safety mechanism is in working order
before operation. First, disconnect the hose from the
tool and open the magazine. Turn the lock knob (lock
pin) to make sure the trigger is locked and released
alternately with every quarter turn of the trigger lock
knob (lock pin).
.Check walls, ceilings, floors, roofing and the like
carefully to avoid possible electrical shock, gas
leakage, explosions, etc. caused by striking lives
wires, conduits or gas pipes.
COMPRESSED
AIR
\
Magazine
Slide door
Lock
Trigger lock knob
(Lock pin)
Ga
I
Live wire
Advertisement
