Advertisement
MAINTENANCE
CAUTION:
Always be sure that the trigger
is
locked and the air hose is disconnected from the tool before attempting
to perform inspection or maintenance.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
Make sure the safety mechanism is in working order before
operation.
First, disconnect the hose from the tool and open the
magazine. Turn the trigger lock knob (lock pin) to make sure
the trigger is locked and released alternately with every
quarter turn of the trigger lock knob (lock pin).
When the tool is not to be used for an extended period of
time, lubricate the tool using pneumatic tool oil and store
the tool in a safe place. Avoid exposure to direct sunlight
and/or a humid or hot environment.
Trigger lock knob
(Lock pin)
16
Advertisement
